It
is the new SCREEN
dive computer ,
designed to be used in both fresh and salt water. It works in three main modes,
Scuba, Gauge and Freedive. In Gauge mode, it indicates the depth meter and a
digital timer that will allow you to monitor your dives. In Scuba mode it allows
you to manage the change of air and nitrox.
It
has audible alarms and emergency lights. For freedivers it allows you to view
the dive time intervals, current depth and maximum depth reached during each
session.
Log
40 hours of diving in Scuba / Gauge mode. SEAC Screen is the dive computer that
aims to ease the reading all the dive profile data.
The
large display shows all the main information in one view, with clearly readable
and distinct characters.
Contrast
and brightness can be adjusted, as well as the light mode (automatic or manual)
and the backlight time (from 2 sec to 60 sec).
The two well-defined front buttons let allow the SEAC Screen to be managed quickly and easily even with very thick gloves.
The SEAC Screen dive planner allows you to simulate and plan a dive by displaying the NDL time based on a set depth and other data input (mixture, maximum PpO2, caution level).
Downloadable
data via USB (sold separately).
Firmware
update and SEAC Dive Manager software are available online (free download at
Seacsub.
com).
SEAC
Screen operates in 3 main modes:
Scuba,
Gauge and Freedive.
In
Scuba mode, the dive profile is completely managed according to the B ZHL-16C
decompression algorithm.
It
supports the management of 1 or 2 mixes (air, Nitrox and other mixes with O2 up
to 99%), notifying the user at the most suitable time to change the
mix.
It
has sound alarms and warning lights in case of violation of the decompression
stop, excessive ascent speed and exceeding the maximum depth allowed for all
mixes in use.
In
Gauge mode, the SEAC Screen computer displays depth gauge and stopwatch for
fully independent dive management for more experienced divers.
In
Freedive mode, freedivers can view surface intervals and dive times, current
depth and maximum depth reached during the session.
- The display measures 4 x 4.
- Protected by a sturdy rubber housing.
- Total dimensions of the dial is 7 x 7cm.
- The long strap is designed to comfortably wear the SEAC Screen even over a dry suit.
- Total length, from the buckle to the opposite end is 36 cm.
- SEAC Screen works with a CR2450 battery and is not rechargeable. It can be replaced by the user but it is still recommended to contact an authorized SEAC center to change the battery and cover o-ring.
- Maximum
depth 100 meters , calculation of NoFly and Desaturation times, maximum
allowed altitude warning,
fresh or salt water selection.
